Most people are unaware that there are several ways to clean a carpet website here. The choice is between dry and wet cleaning. Many would like the differences to be understood. The differences are real. It is clear that one needs more water. But they go beyond this. It is best to vacuum the carpet first before you use either technique. Cleaning the carpet will be easier if you vacuum first.

Steam Cleaning Let’s begin with the steaming method. The majority of wet-cleaning processes use water, as the name implies. Steaming or shampooing are the two options available.

Using this method, you can literally shampoo your carpet. The foam generated by the machine is applied evenly to all fibers. This causes dirt and stains to be stirred. The dirt gets stuck to the shampoo once it has been agitated. The carpet can be vacuumed clean once it has dried. This dried solution of shampoo removes dirt, stains and other contaminates from carpets.

Steam cleaning can also be called wet-cleaning. Your cleaner will spray hot water with detergent onto your carpet when steam cleaning. This will loosen the dirt. The next step is to vacuum the area with a specialist vacuum. This will remove any water that remains.

Cleaning To clean carpets using the dry method, a powdery solution is applied to the carpet. A specially designed machine rubs the powder into the carpet fibers. The powder is primarily detergent and a solution for dissolving. Just enough water is added to the powder to keep it moist. A powder that has special properties can be used as a powerful cleaning agent. After you’ve spread the powder over your carpet, vacuum up all of it.

Both have their advantages and disadvantages. The dry method of cleaning is not as effective as the wet. The speed of this method is the main advantage. It could take up to 48 hours before a cleaning that is moist dries. That’s the potential downside. This is because, as previously stated is is a comprehensive and more forceful approach.

The common cleaning method is shown below. The first thing they do is inspect the area that they plan to clean in order to identify what type of dirt it will contain.

They will then vacuum the entire area to remove “easy dirt”.

After vacuuming a preconditioning solution can be used. The solution is used to emulsify dirt particles and biomaterials.

This will loosen any dirt that has been compacted. Compacted dirt will be loosen by using this technique.

After the initial agitation, wash away the cleaning agents that were applied in Step 3. So, all residues from the carpet will be removed. For stubborn spots or stains that are difficult to remove, stain-remover products can be used. The stain may require that these spots “dwell”. They can then perform their function. If the dwell time is incorrect, the solution will need to be rinsed.

After the carpets are cleaned thoroughly and the stains removed, Dupont Teflon Fibre Protectant is usually applied. This step is not mandatory, but many people still recommend it.

NAP:
Spotless Carpet Cleaning North Shore
1-5 Lynbara Ave, St Ives NSW 2075
(02) 8607 8811